SKIL 10-Inch Table Saw Review:
Everything You Need to Know
If you’re shopping for a table saw under $400, the SKIL 10-inch table saw (model TS6307-00) is probably already on your radar. We analyzed data from nine independent video reviewers — including woodworkers, DIYers, and side-by-side comparisons against DeWALT — to give you the most complete picture possible before you spend your money.
The bottom line up front: this saw punches well above its price class in accuracy and power. But it has real limitations you need to know about, especially if you’re tall, value quiet, or need a precision miter gauge right out of the box.
Full Specs at a Glance
| Specification | Detail |
|---|---|
| Model Number | TS6307-00 |
| Blade Size | 10 inches (24-tooth blade included) |
| Motor | 15 Amp universal motor |
| Table Size | 24″ × 22″ |
| Working Height | 33 inches |
| Weight | ~50 lbs (with stand) |
| Fence System | Rack and pinion (tool-free micro-adjust) |
| Dado Capacity | Up to 5/8″ stack |
| Stand | Integrated folding legs (non-removable) |
| Included Accessories | Push stick, anti-kickback pawls, blade guard, dust elbow, two wrenches |
| Soft Start | No |
| Approximate Price | ~$350 USD |
Performance: Real-World Test Results
Power & Hardwood Cutting
The 15-amp motor is the real story here. In the most rigorous testing we found, the SKIL ripped through 8/4 Walnut and dense Leopardwood without hesitation — and with no burning at the cut edge. The same tests put 2×6 pine and 4×4 pressure-treated cedar through the blade, both described as cutting “like butter.”
Where the motor shows strain is on heavy dado work. With a 5/8-inch Freud dado stack at maximum depth, reviewers noted slight bogging — the motor audibly slows under load. For occasional dado cuts it’s acceptable; for repeated deep dadoes, expect the motor to work hard.
Fence Accuracy
This is the SKIL’s crown jewel. The rack and pinion fence — typically a feature found on saws costing $600 or more — lets you dial in measurements with micro-precision. Multiple reviewers compared it favorably to the DeWALT 7485’s fence system. For ripping sheet goods and hardwood, it eliminates the frustrating fence drift common on budget saws.
Out-of-the-Box Calibration
Dust Collection
For a jobsite saw at this price, dust collection is surprisingly capable. One reviewer described the below-table dust port as “freaking good,” with minimal debris accumulating on the floor during rip cuts. Connect a standard shop vac to the dust elbow and you’ll have a reasonably clean workspace.
Build Quality & Design
The SKIL TS6307-00 uses a metal tabletop and metal framing — a genuine differentiator at this price point. The table is solid and doesn’t flex during heavy cuts. The integrated stand is equally sturdy; when set up on an even floor, there is zero wobble under load.
The weaknesses are concentrated in the accessories. The miter gauge is widely criticized as cheap plastic and will need replacing if you do any kind of angle work. The throat plate is also plastic rather than the metal inserts found on higher-end saws like the DeWALT DWE7491RS.
One quirk worth noting: reviewers found the arbor threads slightly rough, which makes blade changes more fiddly than they should be. Combined with the tight blade-change area that requires two wrenches, swapping blades is the most annoying recurring task with this saw.
User Experience & Setup
Assembly & Portability
Assembly is genuinely quick. The folding legs click into place with red release buttons — no tools needed. At approximately 50 lbs, one person can load and unload it from a truck. The carrying handle is well-placed, though reviewers noted the blade guard can bump against your thigh while walking with it.
Smart Touches
Two design choices stand out as genuinely thoughtful: the integrated push stick storage (clipped directly to the saw body — never lost again) and the one-handed leveling leg for uneven floors. These are the kinds of details that separate a product designed by people who actually use saws from one designed only on paper.
The tool-free blade guard installation is another win. Clipping and removing the guard takes seconds rather than the fumbling exercise it is on cheaper saws.
Noise & Motor Start
This is where the SKIL consistently earns complaints across all reviewers: the universal motor is extremely loud. There is no soft-start, so the saw jumps to full speed instantly with a jarring startup. Always wear hearing protection — this is a non-negotiable with this saw.
Working Height
The 33-inch working height is divisive. One reviewer (6’1″) found it uncomfortably low and reported back pain after extended sessions. Another reviewer of the same height described it as “natural and comfortable.” Your mileage will genuinely vary — if you’re over 6 feet, spend some time at a similar height surface before committing.
Pros & Cons
✓ What We Like
- Rack and pinion fence — accuracy usually reserved for $600+ saws
- 15-amp motor handles dense hardwoods (Walnut, Leopardwood, 4×4 PT lumber)
- Genuinely portable at ~50 lbs with folding stand
- Metal tabletop and frame — not cheap plastic construction
- Integrated push stick storage (surprisingly brilliant)
- One-handed leveling leg for uneven surfaces
- Capable dust collection for the price
- Best budget bundle value on the market (~$350)
✗ What We Don’t
- Extremely loud motor — hearing protection mandatory
- No soft-start; jarring, abrupt motor startup
- Miter gauge is cheap plastic and should be replaced immediately
- Plastic throat plate (vs. metal on DeWALT)
- Blade changes are frustrating (tight space, rough arbor threads)
- Working height (33″) may be too low for users over 6 feet
- Calibration varies unit to unit — always check before first use
- No Allen key storage; legs are non-removable
Our Ratings Breakdown
SKIL TS6307-00 vs DeWALT: Side-by-Side
The most common comparison question we see is SKIL vs DeWALT. Here’s the honest breakdown:
| Feature | SKIL TS6307-00 | DeWALT DWE7491RS |
|---|---|---|
| Price | ~$350 ✓ | ~$600+ |
| Weight | ~50 lbs ✓ | ~90 lbs |
| Fence System | Rack & pinion | Rack & pinion (wider range) ✓ |
| Motor | 15A, no soft-start | 15A, with soft-start ✓ |
| Throat Plate | Plastic | Metal ✓ |
| Miter Gauge | Plastic (poor) | Better quality ✓ |
| Noise Level | Very loud | Loud (less jarring) |
| Best For | Budget DIYers, small shops | Contractors, frequent users ✓ |
Bottom line: If your budget is firm at $350–$400, the SKIL wins with no real competition. If you can stretch to $600, the DeWALT DWE7491RS is a meaningfully better saw for frequent or professional use.
Who Should Buy the SKIL 10-Inch Table Saw?
✅ Buy It If You Are:
- A beginner or casual DIYer wanting a capable first table saw without overspending
- A remodeler or tradesperson who needs a genuinely portable jobsite saw under 50 lbs
- Working in a small shop or garage with limited permanent space
- Cutting hardwoods, plywood, and construction lumber — you don’t need a $600 saw for this work
❌ Skip It If You Are:
- A tall user (6’1″+) who does long sessions standing — the 33″ height may cause discomfort
- A professional contractor doing heavy, repeated dado cuts or trim work requiring a top-quality miter gauge
- Working in a space where noise is a real concern (apartment shop, shared building)
- Someone who frequently swaps blades — the blade-change process will frustrate you
Ready to Buy the SKIL TS6307-00?
Check the current Amazon price — it frequently sells below the $350 list price, especially during tool sales.
Check Price on AmazonFrequently Asked Questions
Disclosure: This page contains affiliate links. If you purchase the SKIL TS6307-00 through our Amazon link, we may earn a small commission at no extra cost to you. This does not influence our review — all assessments are based on aggregated testing data from independent reviewers.